Services

Road Sawing (diesel)

Gives a precise cut on flat concrete or bitumen surfaces such as floors driveways, footpaths, suspended slabs and all types of road surfaces.

  • Roadsawing is ideal for the larger jobs where access is not a problem.
  • Depths from 25mm to 400mm deep.

Core Drilling

For cutting of circular holes through re enforced walls and floors. Holes can be drilled on any angle or depth required.
For applications such as electrical conduits, plumber’s pipe work, and for holding bolts for steel erection.

  • Core sizes ranging from 18mm to 700mm diameter.

  • Hand drilling is also available for the smaller areas where there is no room for a drill stand.

 Hand Sawing: Petrol & Hydraulic

Used to cut small areas were a conventional road saw cannot get to.
Petrol hand saws able to cut 150mm deep, and mainly used for outdoor use.

  • Electric handsaws are able to cut 150mm deep and used in smaller indoor areas where petrol fumes are a problem.
  • They are mainly used to create or enlarge windows, doorways, or in many other applications.

Ring Sawing: Petrol & Hydraulic

  • Ringsaws are able to cut from 150mm deep to 265mm deep.
  • Ringsawing is also used to cut concrete to reduce overcutting.
  • Ringsaws are mainly used for the deeper slabs where a greater depth is required

 Soff-Cutt

Soff cutt is used for early entry sawing to reduce the risk of shrinkage cracking.

  • A cutting system for early concrete sawing whilst the concrete is still green and relatively soft.
  • Enables concrete to be cut within 1 to 2 hours after finish.

Wall Sawing

  • A diamond blade on a track mounted system that can be used for vertical, horizontal, and even inverted cuts.
  • This can be used on steep surfaces or floors where it is not possible to use the road saws safely.
  • This is mainly used for cutting precise openings for doorways windows and ventilation units.
  • Can be used to make cuts up to 510mm deep from one side or 1m from both sides - the applications for this saw are endless.

Hire Equipment

In addition to the concrete cutting services listed above, Coastcut Concrete Cutting is also able to arrange hire of the following equipment as optional extras to our concrete cutting services

  • Wet vacs: for slurry control.
  • Slurry cart also available. We will take every measure to ensure that no mess is left behind.
  • Power Generators: Sometimes power may be unavailable or inaccessible, so if any such issues with power are a concern we can arrange alternative power supplies.
  • Water Cart: If the nearest water mains are too far away or will not handle the amount required to cut your concrete, we can supply our own water
  • If any of these are required to do a job, we are happy to arrange the hire and take out the hassle of organising such equipment yourself. Please contact us for quotes on hiring these.


Always using the best brand for the best job